Spindle Differences between touring and non-touring Y33

Discussion in 'Infiniti/Nissan' started by jubei07, Aug 23, 2007.

Thread Status:
Not open for further replies.
  1. jubei07

    jubei07 New Member

    I was contemplating on getting coilovers soon, maybe a used set. However I was concerned with the spindles. I thought I read somewhere there was a difference between non-touring and touring spindles, is this true? Are there any other differences on coilovers that I should be aware of ??
     
  2. Benji

    Benji VSC Super Moderator

    Hmm, I'm not sure myself between the touring and non-touring, but be sure to look out for coilovers without the ABS holes, some of them don't have them and you'll have to make your own holes to use the ABS sensors. I also heard there are different size studs used on the upper mounts between 12mm and 14mm, I think other Y33 owners should chime in to confirm that though.
     
  3. kinkyfly

    kinkyfly New Member

    i think touring and non-touring spindles are same.
    but some jdm y33 (gloris, cedric not sure about cima) use 12mm (pie) stud.
    us y33 use 14mm stud.
     
  4. VIP-UCF

    VIP-UCF Active Member

    All U.S. model 97-01 Q45's are the same suspension wise...japan models have differences because they have different motor options...
     
Thread Status:
Not open for further replies.

Share This Page