Aftermarket wheel boss kit/hub kit

Discussion in 'Interior' started by LXU55, Jan 8, 2007.

  1. LXU55

    LXU55 New Member

    Hey everyone,

    I’m desperately looking for a LS400 steering wheel boss kit, or “hub kit” to fit an aftermarket wheel.

    I tried numerous companies, and so far none have a dedicated listing for any LS400. I no longer have cruise control so that’s not an issue.

    I’ve seen quite a few on imported Celsior’s, but what the boss/hub came off is a mystery. Soarer? Chaser/Mark2?

    Any help would be hugely appreciated.

  2. Dominik

    Dominik VSC Super Moderator

    Though when it comes to fitting a boss kit all you need is a similar spline. My boss kit is off a 300ZX, spline was the same, but my car had a complicated airbag/horn arrangement. I fabbed my own horn contact; airbag... umm yeah well i dont like airbags
  3. Caoboy

    Caoboy New Member

    I THINK you can use an supra/sc hub/boss. IIRC you can fit a supra wheel on an sc, and an sc wheel on an LS 400. i know you can fit the sc430 wheel on an LS, so chances are, that MIGHT be the one to work for it.

Share This Page